Boot to uefi firmware settings from inside windows 10

The UEFI BIOS is a special software program that connects your computer’s firmware lớn its operating system (OS). It’s the first program that runs when you turn on your PC. It checks to lớn see what hardware components your PC has, wakes the components up, và hands them over khổng lồ the OS.

When opening the UEFI BIOS menu, you might find that you’re unable to lớn access the UEFI Firmware Settings. This could hinder you from fixing several system issues. If these settings are missing from your PC, we’ll show you how you can bring them baông chồng.

Bạn đang xem: Boot to uefi firmware settings from inside windows 10

Why Are the UEFI Firmware Settings Missing?

Depending on your PC’s manufacturer, you can access the UEFI BIOS settings in various ways. If you can’t find the UEFI Firmware Settings in the BIOS thực đơn, then here are some common reasons for this issue:

Your PC’s motherboard doesn’t support UEFI. The Fast Startup function is disabling access to the UEFI Firmware Settings menu. Windows 10 was installed in Legacy Mode.

Here are some solutions you can try.

1. Verify That Your PC Is Equipped With UEFI

Before attempting any other potential fix, you need to verify that your PC’s motherboard is equipped lớn tư vấn UEFI. If your PC is an older Mã Sản Phẩm, the chances are that the UEFI Firmware Settings are unavailable.

Here’s how you can check your PC’s BIOS Mode:

Press the Windows Key + R khổng lồ open the Run comm& dialog box. Type msinfo32 and press Enter lớn open the System Information screen. Select System Summary on the left-h& side pane. Scroll down on the right-hvà side pane và look for the BIOS Mode option. Its value should either be UEFI or Legacy. If it"s Legacy, then your PC can’t access the UEFI Firmware Settings.


2. Bypass the Fast Startup Function

The Fast Startup function allows you khổng lồ boot up your PC quickly. When enabled, the feature could cut off the delay in loading some UEFI BIOS menu options. For this reason, it could prevent you from accessing the UEFI Firmware Settings. Bypassing this function could help resolve sầu your issue.

To get started, open the Windows Start Menu and select the Power ibé. Hold the Shift key & then select Shut down from the power options. This will bypass Windows 10 fast startup and shut down your PC completely. Power on your computer again and start pressing the dedicated BIOS Setup key.

If this resolves your issue, you can disable the Fast Startup feature to lớn make the UEFI Firmware Settings accessible at all times. But, bear in mind that this will mean slightly longer boot-up times.

3. Create a Boot-to-UEFI Firmware Settings Desktop Shortcut

Another way lớn resolve this issue is lớn create a Desktop shortcut that forces your PC to lớn boot directly into lớn the UEFI Firmware Settings thực đơn.

Here’s how you can bởi vì this:

Right-click on a blank space on your Desktop, select New, và then select Shortcut. On the next screen, type shutdown /r /fw and cliông xã the Next button. Piông chồng a suitable name for the shortcut và then cliông xã Finish. Right-cliông chồng the shortcut, select the Properties option, và then select the Advanced button. On the next screen, kiểm tra the Run as administrator box and hit OK. Select Apply > OK khổng lồ apply these changes. To use the shortcut, double-cliông chồng on it. Your PC should restart directly into lớn the UEFI Firmware Settings thực đơn.

4. Change the BIOS From Legacy to lớn UEFI by Converting MBR Disk lớn GPT Disk

Depending on your PC’s age & specifications, it either uses a Master Boot Record (MBR) or a GUID Partition Table (GPT) disk. Even if your motherboard is equipped with UEFI capabilities, UEFI Firmware Settings won’t be accessible if your drive sầu is equipped with the MBR disk. In this instance, you’ll need to lớn switch the BIOS from Legacy to lớn UEFI by converting the MBR disk to lớn a GPT disk.

Considering that you are converting a system disk, it’s best lớn create a system image to lớn bachồng up your system. We strongly advise taking a system backup as there is the potential for data loss during this process.

If you already know that your partition is the MBR-type & your system is capable of booting from UEFI, you’re ready. You can go ahead with converting your drive to GPT format.

Otherwise, here’s how you can kiểm tra whether your PC is equipped with the MBR or GPT disk.

Press the Windows key + R to lớn open the Run comm& dialog box. Type diskmgmt.msc & cliông chồng Enter lớn open the Disk Management window. Right-cliông xã on Disk 0 (or the disk that contains the Windows installation) và select Properties.

Xem thêm: 'Dảk' Và ' Bủh Bủh Là Gì ? Dảk, Bủh, Lmao Là Gì

Right-clicking on Disk 0 on the Disk Management window
In the Properties screen, cliông xã the Volumes tab. Look for the Partition style option under Disk Information.

Checking the Partition style under Disk Information
If the partition style is GUID Partition Table (GPT), then there’s no need lớn continue with the conversion.

As a last resort, you can reset the CMOS settings from your PC’s motherboard. This will help restore your computer lớn its mặc định BIOS settings.

Here’s how you can get started with this.

Turn off your computer và unplug it from the power source. Remove sầu the bottom cover of your PC. From here, look for the CMOS battery and jumpers on the motherboard. To easily locate the CMOS jumpers, look for a “CLR CMOS” reading on the motherboard. Usually, you’ll find three pins where the CMOS jumpers are located. The jumpers will be located on only two of those pins. If they’re on the first & second pins, shift them khổng lồ the second và third pins. If your motherboard only has two pins, the jumpers will likely be plugged inlớn one pin. In this case, plug them on both pins. Next, remove the CMOS battery from its slot. Wait for about 15 seconds, & then put it bachồng on. Move sầu the CMOS jumpers back lớn their original pins. Put the computer cover back on, plug in your computer, and power it on.

On more advanced motherboards, you’ll find a designated button for resetting the CMOS settings. This will be labeled “CMOS,” “CMOS_SW,” or something similar. You can remix the CMOS settings by pressing this button và holding it down for a few seconds.

If you struggle to lớn find any hardware components on your PC, check your motherboard manual for assistance. Alternatively, you can kiểm tra your motherboard type and find out more about it online.

Missing UEFI Firmware Settings? Not Anymore

Now you know how to fix the missing UEFI Firmware Settings in Windows 10. You’ll find these settings handy when it comes to troubleshooting various Windows 10 system issues. If your motherboard doesn’t support these settings, then it’s time to lớn consider an tăng cấp.

6 Reasons Why You Should Upgrade Your PC Motherboard Not sure if you should tăng cấp your motherboard? Here are a few tips khổng lồ explain when and why lớn buy a new motherboard.

Leave a Reply

Your email address will not be published. Required fields are marked *